Mixer control system for brick making based on PLC Omron CP1E-NA20DR-A
|
Abstract
Bricks play a very important role in the construction of houses. No matter how beautiful a house is, without bricks, it cannot be said to be a house. With the development of architecture, bricks are not limited to the protection of the house, the role of bricks is now shifting towards a broader architectural design or construction. This research was conducted by designing hardware and software design and research materials. This hardware consists of several parts and ways of working in producing bricks, ranging from the frame as a support, control panel from PLC, pneumatic system, soil milling place, and 3-phase induction motor as a drive for the milling process so as to produce soil that is ready for molding. In programming the OMRON CP1E NA20DR-A PLC, supporting software is needed, namely CX-ONE software. CX-ONE software is designed on the software arranged according to the working principle, the volume of the mixture between 2 liters of soil and 2 liters of water using a delta circuit then a brick dough is produced that can be used properly. The existence of this tool is expected to make it easier to produce bricks.
Keywords
Full Text:
PDFReferences
E. B. Wetherley, D. A. Roberts and J. P. McFadden, “Mapping spectrally similar urban materials at sub-pixel scales,” Remote Sensing of Environment, Vol. 195, pp. 170-183, 2017.
S. S. A. Syed-Hassan, Y. Wang, S. Hu, S. Su and J. Xiang, “Thermochemical processing of sewage sludge to energy and fuel: Fundamentals, challenges and considerations,” Renewable and Sustainable Energy Reviews, vol. 80, pp. 888-913, 2027.
S. Palaniyappan, V. E. Annamalai, S. Ashwinkumaran, D. Thenmuhil and D. Veeman, “Utilization of abrasive industry waste as a substitute material for the production of fireclay brick,” Journal of Building Engineering, vol. 45, p. 103606, 2022.
A. Almssad, A. Almusaed and R. Z. Homod, “Masonry in the Context of Sustainable Buildings: A Review of the Brick Role in Architecture,” Sustainability, vol. 14, no. 22, p. 14734, 2022.
M. Dabaieh, J. Heinonen, D. El-Mahdy and D. M. Hassan, “A comparative study of life cycle carbon emissions and embodied energy between sun-dried bricks and fired clay bricks,” Journal of Cleaner Production, vol. 275, p. 122998, 2020.
G. S. De Silva and B. V. A. Perera, “Effect of waste rice husk ash (RHA) on structural, thermal and acoustic properties of fired clay bricks,” Journal of building engineering, vol. 18, pp. 252-259, 2018.
M. Miyasaka, M. Haghighipanah, Y. Li, J. Matheson, A. Lewis and B. Hannaford, "Modeling Cable-Driven Robot With Hysteresis and Cable–Pulley Network Friction," in IEEE/ASME Transactions on Mechatronics, vol. 25, no. 2, pp. 1095-1104, April 2020, doi: 10.1109/TMECH.2020.2973428.
I. Kuric, I. Klačková, K. Domnina, V. Stenchlák and M. Sága Jr, “Implementation of predictive models in industrial machines with proposed automatic adaptation algorithm,” Applied Sciences, vol. 12, no. 4, p. 1853, 2022.
A. Stanciu, "Blockchain Based Distributed Control System for Edge Computing," 2017 21st International Conference on Control Systems and Computer Science (CSCS), Bucharest, Romania, 2017, pp. 667-671, doi: 10.1109/CSCS.2017.102.
I. Ahmed, S. Obermeier, S. Sudhakaran and V. Roussev, "Programmable Logic Controller Forensics," in IEEE Security & Privacy, vol. 15, no. 6, pp. 18-24, November/December 2017, doi: 10.1109/MSP.2017.4251102.
D. Kumar, A. Basit, A. Saleem and E. G. Abbas, "PLC Based Monitoring & Protection of 3-Phase Induction Motors against Various Abnormal Conditions," 2019 2nd International Conference on Computing, Mathematics and Engineering Technologies (iCoMET), Sukkur, Pakistan, 2019, pp. 1-6, doi: 10.1109/ICOMET.2019.8673497.
W. Liu and T. A. Lipo, "Analysis of Consequent Pole Spoke Type Vernier Permanent Magnet Machine With Alternating Flux Barrier Design," in IEEE Transactions on Industry Applications, vol. 54, no. 6, pp. 5918-5929, Nov.-Dec. 2018, doi: 10.1109/TIA.2018.2856579.
H. Shin, J. Chang and D. Hong, "Design and Characteristics Analysis of Coaxial Magnetic Gear for Contra-Rotating Propeller in Yacht," in IEEE Transactions on Industrial Electronics, vol. 67, no. 9, pp. 7250-7259, Sept. 2020, doi: 10.1109/TIE.2019.2944069.
Y. C. Arif, R. Rakhmawati, A. Saksana and Suhariningsih, "Implementation of AC-AC Voltage Controller for Reduce Transient Current at Three Phase Induction Motor," 2019 International Seminar on Application for Technology of Information and Communication (iSemantic), Semarang, Indonesia, 2019, pp. 465-470, doi: 10.1109/ISEMANTIC.2019.8884300.
O. R. Agyare, A. B. Asiedu-Asante and A. R. Biney, "Fuzzy Logic Based Condition Monitoring of a 3-Phase Induction Motor," 2019 IEEE AFRICON, Accra, Ghana, 2019, pp. 1-8, doi: 10.1109/AFRICON46755.2019.9133780.
S. Baig, T. Vahabzadeh, S. Ebrahimi and J. Jatskevich, "Reconfigurable Star-Delta VBR Induction Machine Model for Predicting Soft-Starting Transients," 2022 IEEE International IOT, Electronics and Mechatronics Conference (IEMTRONICS), Toronto, ON, Canada, 2022, pp. 1-7, doi: 10.1109/IEMTRONICS55184.2022.9795720.
Ermawati, F. Palaha, Yolnasdi, E. H. Arya, Machdalena and E. Yusrinal, "Analysis of Starting Current and Electrical Energy in Three Phase Induction Motor As A Chemical Processing System in PT Riau Andalan Pulp & Paper," 2022 9th International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), Jakarta, Indonesia, 2022, pp. 264-269, doi: 10.23919/EECSI56542.2022.9946635.
Y. Lan, Y. Benomar, K. Deepak, A. Aksoz, M. E. Baghdadi, E. Bostanci and O. Hegazy, “Switched reluctance motors and drive systems for electric vehicle powertrains: State of the art analysis and future trends,” Energies, vol. 14, no. 8, p. 2079, 2021.
A. T. Wahyudi, T. Ramadhan, F. A. Adam, N. Ismail, F. Rivaldi and M. R. Effendi, "On The Design of Object Stamping System Using Electro-Pneumatic Based on PLC OMRON CP1E," 2022 16th International Conference on Telecommunication Systems, Services, and Applications (TSSA), Lombok, Indonesia, 2022, pp. 1-5, doi: 10.1109/TSSA56819.2022.10063896.
Â. Camponogara, H. V. Poor and M. V. Ribeiro, "The Complete and Incomplete Low-Bit-Rate Hybrid PLC/Wireless Channel Models: Physical Layer Security Analyses," in IEEE Internet of Things Journal, vol. 6, no. 2, pp. 2760-2769, April 2019, doi: 10.1109/JIOT.2018.2874377.
I. G. N. S. Hernanda, I. M. Y. Negara, D. A. Asfani, D. Fahmi, N. S. Anggito and C. Bahy, "Experimental Setup for Ferroresonance Initiation On 3-Phase Low Voltage Transformer," 2021 3rd International Conference on High Voltage Engineering and Power Systems (ICHVEPS), Bandung, Indonesia, 2021, pp. 552-557, doi: 10.1109/ICHVEPS53178.2021.9600931.
DOI: https://doi.org/10.31763/simple.v4i3.69
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Eka Budi Setiawan, Wahyu Sapto Aji
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Signal and Image Processing Letters
ISSN Online: 2714-6677 | Print: 2714-6669
Published by Association for Scientific Computing Electrical and Engineering (ASCEE)
Website : https://simple.ascee.org/index.php/simple/
Email 1 : simple@ascee.org
Email 2 : azhari@ascee.org
