The Method of Taking the Blessing Ball for Manual Robots at the 2018 Indonesian Robot Contest

Andi Septian, Wahyu Sapto Aji

Abstract


KRAI (Indonesian Abu Robot Contest) is a robotics contest between Higher Education in Indonesia. Indonesian ash robot contest organized by the Directorate General of Higher Education (DIRJEN DIKTI). The winner of the KRAI will represent Indonesia in the ABU (Asia-Pacific Broadcasting Union) Robocon which is held annually with locations moving around within ABU member countries. KRAI 2018 made a blessing ball picking robot with a gripper. The parameter that must be achieved is that the optimization of the robot drive can take the blessing ball. The design of the blessing ball picking mechanic can use the servo gripper by determining the slope of the robot. The angle of inclination of the robot determines the taking of the ball. Based on the results of the study, the results were obtained by testing carried out taking test data with an angle of 20 ̊-50 ̊. The robot can pick up when 1 ball with that angle. Testing with an angle of 50 ̊-80 ̊. The robot can take 2 balls with that angle. Testing with an angle of 80 ̊-110 ̊. The robot can take 3 balls with that angle. With an angle of 110 ̊-140 ̊. The robot can take 2 balls. With a blade of 140 ̊-170 ̊ the robot can take 1 ball. In the method of taking the ball in the 10 tests that have been carried out, there are experiments that are declared efficient to be able to take 3 balls with a 100% success percentage in an average time of 21 seconds. So it can be implied that the tester at the ball picking used an angle of 80 ̊-110 ̊ more efficiently than the angle of 20 ̊-80 ̊ and 110 ̊-170 ̊.

Keywords


Slope; Blessing Ball; KRAI; Gripper

Full Text:

PDF

References


A. R. Pahlevi, D. Syauqy and B. Rahayudi, “Implementasi Gripper Pada End Effector Robot Untuk Memegang Telur Ayam Dengan Sensor FSR (Force Sensitive Resistor),” Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer e-ISSN, vol. 2548, p. 964X. 2018.

C. L. Fall et al., "Intuitive wireless control of a robotic arm for people living with an upper body disability," 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Milan, Italy, 2015, pp. 4399-4402, doi: 10.1109/EMBC.2015.7319370.

M. M. Amin, M. A. A. Nugratama, A. Maseleno, M. Huda and K. A. Jasmi, “Design of cigarette disposal blower and automatic freshner using mq-5 sensor based on atmega 8535 microcontroller,” International Journal of Engineering & Technology, vol. 7, no. 3, pp. 1108-1113, 2018.

V. Patidar, A. Mishra and R. Tiwari, "Robotic Gripper Arm System with Effective Working Envelope," 2018 Second International Conference on Intelligent Computing and Control Systems (ICICCS), Madurai, India, 2018, pp. 1061-1065, doi: 10.1109/ICCONS.2018.8662945.

H. M. Jawad, R. Nordin, S. K. Gharghan, A. M. Jawad and M. Ismail, “Energy-efficient wireless sensor networks for precision agriculture: A review,” Sensors, vol. 17, no. 8, p. 1781, 2017.

S. Hossain and D. J. Lee, “Deep learning-based real-time multiple-object detection and tracking from aerial imagery via a flying robot with GPU-based embedded devices,” Sensors, vol. 19, no. 15, p. 3371, 2019.

N. Rojas, R. R. Ma and A. M. Dollar, "The GR2 Gripper: An Underactuated Hand for Open-Loop In-Hand Planar Manipulation," in IEEE Transactions on Robotics, vol. 32, no. 3, pp. 763-770, June 2016, doi: 10.1109/TRO.2016.2562122.

M. P. Groover, “Automation, Production Systems, and Computer Integrated Manufacturing,” Surabaya: GunaWidya. 2005.

B. Wang, A. McDaid, T. Giffney, M. Biglari-Abhari and K. C. Aw, “Design, modelling and simulation of soft grippers using new bimorph pneumatic bending actuators,” Cogent Engineering, vol. 4, no. 1, p. 1285482, 2017.

H. Kang, et al., “The FaaS system using additive manufacturing for personalized production,” Rapid Prototyping Journal, vol. 24, no. 9, pp. 1486-1499, 2018.

A. R. G. Ramirez, et al., “Towards human smart cities: internet of things for sensory impaired individuals,” Computing, vol. 99, pp. 107-126, 2017.




DOI: https://doi.org/10.31763/simple.v2i2.44

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Andi Septian, Wahyu Sapto Aji

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Signal and Image Processing Letters

ISSN Online: 2714-6677 | Print: 2714-6669
Published by Association for Scientific Computing Electrical and Engineering (ASCEE)
Website : https://simple.ascee.org/index.php/simple/
Email 1 : simple@ascee.org
Email 2 : azhari@ascee.org

 

View My Stats